MLT-388		Accessories:
			Features:		Control board		BD2-3880UC
			- Ultra compact design				Interface	Parallel and RS-232C
			- 80 mm paper width				Number of	Font A: 48
			- 5 V operation				columns	Font B: 64
							Font	A: 12 x 24 dots
								B: 9 x 24 dots
							Command set	ESC/POS
	Specification						Barcode	supported
	Printing method		Line thermal dot printing				Firmware location	Flash memory
	Total dots		576 dots/line				Buffer	2K bytes
	Dot density		8 dots/mm				Supporting devices	Auto-cutter,paper sensor
	Printing with		72 mm					head-up sensor, LF switch
	Printing speed		max. 480 dot-lines/s					error LED,Paper out LED
	Paper feeding pitch		0.125 mm				Dimensions	80 x 90 mm
	Sensors	Head temperature	Thermistor				Source voltage	5.0 V +/-5%
		Paper presence	Photo-interrupter				Gate array	202LA-00
		Head-up	Mechanical switch		Auto-cutter		ACS-230-5V
	Voltage range	VH	DC 4.2 - 8.5 V				Cutting method	Slide cutting
		Vdd	DC 4.75 - 5.25 V				Paper width	50 - 89 mm
	Current	Head (VH=5V)	Max.approx.2.5 A				thickness	0.06 - 0.075 mm
	consumption	Motor (VH=5V)	Max.approx.0.5 A				Max.cuts/min	20 cuts/min
	Recommended	Width	80 +0/-1 mm				Voltage	5.0 V +/-10%
	paper	Thickness	65 µm				Current (peak)	2.8 A
		Paper (Manufacturer)	TF50KS-E2D (Nippon paper)				Oper. temperature	0 - 45 C
	Reliability	Head pulse-resistance	10 000 000 pulses or more				Dimensions	102 x 55.7 x 15 mm
		Head wear-resistance	50 km or more				Weight	180 g
	Environment	Operation	Temperature: 0 - 45 C				Reliability	300 000 cuts
			Humidity: 35 - 85 % RH				Number of tab left
		Storage	Temperature: -20 - 60 C				full cut blade tape	none
			Humidity: 10 - 90 % RH				partial cut blade tape	none or 1 tab
	External dimensions (W x D x H)		99.5 x 41 x 21 mm
	Weight		Approx. 95 g