Type classification
	LT-2321  C	1 - Size	2 - Voltage	3 - Type			4 - Cutter
	123  4	2 : 2" class	2 : 24 V	1 : removable			None : standard
		3 : 3" class			platen model		C : with cutter
			LT-2321		Accessories:
			Features:		Control board		BD2-2221
			- Platen removable design				Interface	Parallel, Serial or USB
			- Simple and compact design				Number of	Font A: 48
			- High speed printing				columns	Font B: 64
			- Cutter model available				Font	A: 12 x 24 dots
								B: 9 x 24 dots
							Command set	ESC/POS
	Specification						Barcode	supported
	Printing method		Line thermal dot printing				Firmware location	Flash memory
	Total dots		576 dots/line				Buffer	4K bytes
	Dot density		8 dots/mm				Supporting devices	Auto-cutter,paper sensor
	Printing with		72 mm					head-up sensor, LF switch
	Printing speed		max. 150 mm/s					error LED,Paper out LED
	Paper feeding pitch		0.125 mm				Dimensions	90 x 65 x 20 mm
	Sensors	Head temperature	Thermistor				Source voltage	5.0 V +/-5% and 24V +/-5%
		Paper presence	Photo-sensor				Gate array	202LA-00
		Head-up	Mechanical switch		Auto-cutter		ACS-230C/CF
	Voltage range	VH	DC 21.6 - 26.4 V				Cutting method	Slide cutting
		Vdd	DC 4.75 - 5.25 V				Paper width	80 mm
	Current	Head (VH=5V)	Max.approx.5.2 A				thickness	0.06 - 0.15 mm
	consumption	Motor (VH=5V)	Max.approx.0.41 A				Max.cuts/min	20 cuts/min
	Recommended	Width	80 mm				Voltage	24 V +/-10%
	paper	Thickness	60 - 150 µm				Current (peak)	0.8 A
		Paper (Manufacturer)	TF50KS-E2D (Nippon paper)				Oper. temperature	0 - 45 C
	Reliability	Head pulse-resistance	50 000 000 pulses or more				Dimensions	80 x 55.7 x 15 mm
		Head wear-resistance	50 km or more				Weight	180 g
	Environment	Operation	Temperature: 0 - 45 C				Reliability	300 000 cuts
			Humidity: 35 - 85 % RH				Number of tab left
		Storage	Temperature: -20 - 60 C				full cut blade tape	none
			Humidity: 10 - 90 % RH				partial cut blade tape	none or 1 tab
	External dimensions (W x D x H)		108 x 58 x 20 mm
	Weight		Approx. 97 g